Flat Panel UPVC Back Door Non Glazed & Frame

UPVC Doors are high quality Vacuum Formed 100% uPvc Doors. Manufactured by compressing two PVCu skins either side of an Extra High Density Natural core at pressures three and half tonnes per square metre. Creating a solid door panel that is resists both heat and moisture and retains a high colour stability. All door panels are backed by a 10 year manufacturers warranty. Door panels come in a selection of styles and finishes, from white to woodgrain and half glazed to completely solid panels.

Rated People How to fit a UPVC Front Door How to measure a Double Glazed Door
Like it? Make sure you use the buttons on the left to share or send the page to your own or somebody else's address so you can come back esily.

Door Colours

Door Colours How To Measure Glass Options
Door Colour (Outside / Inside):  
Furniture Colour:  
Width (mm):  
Height (mm):  
Hinge Side (Viewed From Outside):  
Do you Need An Extended Cill:  
Do You Need A Low Threshold:  
Do You Need Frame Extenders?:  

SELECT Quantity

TOTAL: £279.00

buy

Flat Panel UPVC Back Door Non Glazed & Frame

Standard UPVC Door made to measure, Max Height 2200mm Max Width 1060mm.

Height 1983mm - 2200mm

Width 840mm - 1060mm

Specify your sizes from the drop down boxes. 

Brand new UPVC front doors in a choice of colours, including letterbox, handles and locks.
The door opens inwards when standing outside , and you need to specify right or left side hinges to determine which way the door will open inwards.

Note: The door is pre-hung in frame for very easy installation.
 
Yes there are cheaper doors available but remember you MUST compare like for like. Letterboxes flapping in the wind and letting in the rain, weak door locks that constantly rust up and need changing. Our fittings are high quality and do not give problems. Buy with confidence.

ONLY £279 INC VAT
 
UPVC Door Standard Spec:

  • Hinged left or right [when viewed from the outside]
  • Open inwards
  • External Cill, 150mm
  • Galvanised steel reinforced 70mm UPVC frame
  • Low threshold available [better access especially wheelchairs]
  • Threshold bottom frame 77mm
  • 3x adjustable hinges
  • Fab n Fix Lever handles [chrome, gold, black or white]
  • 3 x keys
  • Internally beaded Toughened double glazed Pilkington k 28mm energy saving safety glass


Door Discount

DOOR FURNITURE

  • Letter box, 180 degree opening.
  • Upgrade option of Fab n Fix Letterbox
  • Fab & Fix Lever Handles, in a choice of colours, highly resilient, elegant and conventionally styled.


 

SECURITY & LOCKS

  • 4 Rollers, deadbolt & latch locking system
  • Galvanised steel reinforced 70mm UPVC frame
  • Toughened double glazed 28mm Pilkington K [low e] energy saving safety glass to BS 6206 to top arch, clear glass


 

Door Discount

DOOR COLOURS

  • White
  • Rosewood/Cherry
  • Light Oak

 

Need Help




NEED ANY HELP? CALL US

01482 488961 / 0844 414 6776

 

 

All production processes comply fully with the quality assurance standard BS EN ISO 9001.
Door Discount

Delivery is charged on order value at the following rates:

45
Delivery price: £45.00

How to measure for a new PVC front door

These guidelines are to help you measure for a new PVC front and frame and make an accurate measurement.

Measure the door opening outside on both the height and width.

You have to always measure the exact brickwork opening and not the old frame or door.

Measure brick to brick in at least three different places and then deduct 10mm from both the final height and width measurements. - This is to allow for the for 5mm fitting allowance around the new frame. This will make sure the new frame will sit plumb and square once in place.

If you have any gaps then spacers and filler will be required to secure the frame into place and fill any of the gaps.


Vital: Please remember:

  • Do not measure your existing door or frame but measure the brick opening.
  • Make sure to measure in at least three different places and deduct 10mm from both the final height and width measurements - we do not make any fitting allowances on the sizes you provide.
  • All dimensions to be supplied in Metric and all designs viewed externally.

How to Measure - Width

Width
The width should be measured brick to brick at three points - top, middle and bottom of the opening. The smallest of these measurements is taken as the width. Always deduct 10mm from the final width.


How to Measure - Height

Height
The height should be measured brick to brick at three points - left, middle and right of the opening. The smallest of these measurements is taken as the height. Always deduct 10mm from the final height.